Product Type: Apexior http://www.dampney.com Thu, 28 Mar 2024 10:25:59 GMT Thu, 28 Mar 2024 10:25:59 GMT Apexior 1 http://www.dampney.com/Product-Line/AT/View/PID/8 Dennis Aikman 8 <b>Product Name</b>:&nbsp;Apexior 1<BR><b>HTML Title</b>:&nbsp;Boiling Water - Steam Immersion Coating <BR><b>Short Description</b>:&nbsp;One component, boiling water / steam immersion coating to 700F (371C)<BR><b>Prop 65 Warning</b>:&nbsp;False<BR><b>SDS</b>:&nbsp;<a href='/Portals/1/PropertyAgent/456/Files/8/Apexior 1 - SDS 01182019.pdf'>Apexior 1 - SDS 01182019</a><BR><b>Data Sheet</b>:&nbsp;<a href='/Portals/1/PropertyAgent/456/Files/8/001.pdf'>001</a><BR><b>Description</b>:&nbsp;A steam resistant coating/lining formulated to protect carbon steel surfaces. Apexior Number One is designed for applications ranging from 200°F (93°C) up to 700°F (371°C) continuous. Typical applications for the product are carbon steel kilns, steam piping, steam traps, steam<br />coils and interior of boilers.<BR><b>Common Uses</b>:&nbsp;• Dry Kiln Coating<br />• Lumber Kiln Coating<br />• Kiln Seal Moisture Barrier<BR><b>Features</b>:&nbsp;• Air dries, easy to apply<br />• Excellent wettability properties<br />• Easily re-coatable<br />• Resistant to boiling water/steam to 700°F<br />• Increases heat transfer efficiency<br />• Outstanding resistance to thermal shock (immersion)<br />• Inert to water treatment<br />• Prevents corrosion in standby service<br />• Prevents scale buildup<br />• Surface tolerant features<BR><b>Components</b>:&nbsp;1<BR><b>Description HTML Content</b>:&nbsp;<p>Apexior Number 1 is a single component, easy to apply air dry coating specifically formulated for the hot waterside corrosion prevention of metal surfaces. It is a coating that excels in severe thermal cyclic immersion service. Apexior Number 1 is resistant to continuous immersion in boiling water and steam from 200&deg;F (93&deg;C) to 700&deg;F (371&deg;C). It aids in the reduction and prevention of tight bonding of hard scale and allows for easy cleaning and removal of any scale buildup in steam generating equipment. Apexior Number 1 prevents pitting corrosion and stops corrosion that has already begun - except for badly pitted areas. It has outstanding wetting properties and adheres well to power tooled cleaned areas. Equipment coated with Apexior Number 1 will also see an increase in heat transfer efficiency. Apexior Number 1 performs ideally with water treatment in steam generating equipment.</p> <BR> Thu, 16 Aug 2012 15:17:00 GMT Apexior 1C http://www.dampney.com/Product-Line/AT/View/PID/58 Dennis Aikman 58 <b>Product Name</b>:&nbsp;Apexior 1C<BR><b>HTML Title</b>:&nbsp;Boiling Water - Steam Immersion Coating VOC <BR><b>SKU</b>:&nbsp;001C<BR><b>Short Description</b>:&nbsp;One component, boiling water / steam immersion coating to 700F (371C)<BR><b>SDS</b>:&nbsp;<a href='/Portals/1/PropertyAgent/456/Files/58/Apexior1C.pdf'>Apexior1C</a><BR><b>Data Sheet</b>:&nbsp;<a href='/Portals/1/PropertyAgent/456/Files/58/001C.pdf'>001C</a><BR><b>Features</b>:&nbsp;• Air dries, easy to apply<br />• Excellent wettability properties<br />• Easily re-coatable<br />• Resistant to boiling water/steam to 700°F<br />• Increases heat transfer efficiency<br />• Outstanding resistance to thermal shock (immersion)<br />• Inert to water treatment<br />• Prevents corrosion in standby service<br />• Prevents scale buildup<br />• Surface tolerant features<BR><b>Components</b>:&nbsp;1<BR><b>Description HTML Content</b>:&nbsp;<p>Apexior Number 1 is a single component, easy to apply air dry coating specifically formulated for the hot waterside corrosion prevention of metal surfaces. It is a coating that excels in severe thermal cyclic immersion service. Apexior Number 1 is resistant to continuous immersion in boiling water and steam from 200&deg;F (93&deg;C) to 700&deg;F (371&deg;C). It aids in the reduction and prevention of tight bonding of hard scale and allows for easy cleaning and removal of any scale buildup in steam generating equipment. Apexior Number 1 prevents pitting corrosion and stops corrosion that has already begun - except for badly pitted areas. It has outstanding wetting properties and adheres well to power tooled cleaned areas. Equipment coated with Apexior Number 1 will also see an increase in heat transfer efficiency. Apexior Number 1 performs ideally with water treatment in steam generating equipment.</p><BR> Thu, 16 Aug 2012 15:17:00 GMT Apexior 3 http://www.dampney.com/Product-Line/AT/View/PID/9 Dennis Aikman 9 <b>Product Name</b>:&nbsp;Apexior 3<BR><b>HTML Title</b>:&nbsp;Fresh or Salt Water Immersion Coating<BR><b>Short Description</b>:&nbsp;One component, fresh / salt water immersion coating from -40F to 140F (-40C to 60C)<BR><b>Prop 65 Warning</b>:&nbsp;False<BR><b>SDS</b>:&nbsp;<a href='/Portals/1/PropertyAgent/456/Files/9/003-SDS-2019.pdf'>003-SDS-2019</a><BR><b>Data Sheet</b>:&nbsp;<a href='/Portals/1/PropertyAgent/456/Files/9/Apexior3.pdf'>Apexior3</a><BR><b>Application Method</b>:&nbsp;Spray|Brush<BR><b>Generic Type</b>:&nbsp;Organic<BR><b>Color</b>:&nbsp;Black<BR><b>Common Uses</b>:&nbsp;• Chillers<br />• Cold water storage tanks<br />• Condenser heads and shells<br />• Inside shell of AC units<br />• Pump casings on fresh/salt water intakes<br />• Inner housings of pumps<br />• Sump pump pits and chain lockers<br />• Bilge and forepeak tanks<br />• Ballast and brine tanks<BR><b>Features</b>:&nbsp;• Air dries, easy to apply<br />• Excellent wettability properties<br />• Resistant to fresh/salt water<br />• Easily re-coatable<br />• Surface tolerant features<br />• Inert to water treatment<br />• Prevents scale buildup<BR><b>Continuous Temperature</b>:&nbsp;140°F (60°C)<BR><b>Surface Preparation</b>:&nbsp;SSPC-SP 10<BR><b>Components</b>:&nbsp;1<BR><b>Volume Solids</b>:&nbsp;47%<BR><b>Dry Film Thickness per coat</b>:&nbsp;3.5 - 4.0 mils (87 - 100 microns)<BR><b>Wet Film Thickness per coat</b>:&nbsp;7.0 - 9.0 mils (175 – 225 microns)<BR><b>Theoretical Coverage</b>:&nbsp;758 mil. sq. ft. per gallon<br />18 sq. m. @ 25 microns per liter<BR><b>Application Temperature</b>:&nbsp;50°F-120°F (10°C-50°C)<BR><b>Dry to Touch</b>:&nbsp;16-24 hours<BR><b>Dry Time to Recoat</b>:&nbsp;16-24 hours<BR><b>VOC Content</b>:&nbsp;3.44 lb./gal. (413 g./l.)<BR><b>Dry Time to Ship</b>:&nbsp;7 days<BR><b>Description HTML Content</b>:&nbsp;<p>Apexior Number 3 is a single component, easy to apply air cure coating specifically formulated for the waterside corrosion prevention of metal surfaces. It has outstanding wetting properties and adheres well to power tooled cleaned areas. Apexior Number 3 is resistant to continuous immersion in fresh or salt water as well as frequently wet or high humidity environments. Apexior Number 3 prevents pitting corrosion and stops corrosion which has already begun - except for badly pitted areas. It aids in the reduction and prevention of tight bonding of hard scale and allows for easy cleaning and removal of scale buildup. Apexior Number 3 performs ideally with water treatment.</p> <BR> Thu, 16 Aug 2012 15:20:00 GMT Apexior 3C http://www.dampney.com/Product-Line/AT/View/PID/59 Dennis Aikman 59 <b>Product Name</b>:&nbsp;Apexior 3C<BR><b>HTML Title</b>:&nbsp;Fresh or Salt Water Immersion Coating VOC<BR><b>SKU</b>:&nbsp;003C<BR><b>Short Description</b>:&nbsp;VOC - One component, fresh / salt water immersion coating from -40F to 140F (-40C to 60C)<BR><b>SDS</b>:&nbsp;<a href='/Portals/1/PropertyAgent/456/Files/59/Apexior3CSDS.pdf'>Apexior3CSDS</a><BR><b>Data Sheet</b>:&nbsp;<a href='/Portals/1/PropertyAgent/456/Files/59/003C Jan 2009.pdf'>003C Jan 2009</a><BR><b>Description</b>:&nbsp;Apexior Number 3 is a single component, easy to apply air cure coating specifically formulated for the waterside corrosion prevention of metal surfaces. It has outstanding wetting properties and adheres well to power tooled cleaned areas. Apexior Number 3 is resistant to continuous immersion in fresh or salt water as well as frequently wet or high humidity environments.<BR><b>Application Method</b>:&nbsp;Spray|Brush<BR><b>Generic Type</b>:&nbsp;Organic<BR><b>Color</b>:&nbsp;Black<BR><b>Common Uses</b>:&nbsp;• Chillers<br />• Cold water storage tanks<br />• Condenser heads and shells<br />• Inside shell of AC units<br />• Pump casings on fresh/salt water intakes<br />• Inner housings of pumps<br />• Sump pump pits and chain lockers<br />• Bilge and forepeak tanks<br />• Ballast and brine tanks<BR><b>Features</b>:&nbsp;• Air dries, easy to apply<br />• Excellent wettability properties<br />• Resistant to fresh/salt water<br />• Easily re-coatable<br />• Surface tolerant features<br />• Inert to water treatment<br />• Prevents scale buildup<BR><b>Continuous Temperature</b>:&nbsp;140°F (60°C)<BR><b>Surface Preparation</b>:&nbsp;SSPC-SP 10<BR><b>Components</b>:&nbsp;1<BR><b>Volume Solids</b>:&nbsp;47%<BR><b>Dry Film Thickness per coat</b>:&nbsp;3.5 - 4.0 mils (87 - 100 microns)<BR><b>Wet Film Thickness per coat</b>:&nbsp;7.0 - 9.0 mils (175 – 225 microns)<BR><b>Theoretical Coverage</b>:&nbsp;758 mil. sq. ft. per gallon<br />18 sq. m. @ 25 microns per liter<BR><b>Application Temperature</b>:&nbsp;50°F-120°F (10°C-50°C)<BR><b>Dry to Touch</b>:&nbsp;16-24 hours<BR><b>Dry Time to Recoat</b>:&nbsp;16-24 hours<BR><b>VOC Content</b>:&nbsp;3.44 lb./gal. (413 g./l.)<BR><b>Dry Time to Ship</b>:&nbsp;7 days<BR><b>Description HTML Content</b>:&nbsp;Apexior Number 3 prevents pitting corrosion and stops corrosion which has already begun - except for badly pitted areas. It aids in the reduction and prevention of tight bonding of hard scale and allows for easy cleaning and removal of scale buildup. Apexior Number 3 performs ideally with water treatment.<BR> Thu, 16 Aug 2012 15:20:00 GMT